Used Ammann stationary asphalt plant 240 t/h, 2012

Ammann 240 Specifications:
Capacity: 240 t/hour (at 3% moisture content)

Specifications:
1. Cold Inert Feed System
1.1. 5 Cold Hoppers * 15 m³
1.2. Dosing Belts
5 Cold Hoppers (1.2 kW motors, 570 mm belt width, 10 mm belt thickness, per sensor)
1.3. 25 m long aggregate collection line with a 3 kW electric motor, 680 mm belt width, 10 mm belt thickness, and a capacity of 310 t/hour.
2. Drying Drum and Burner
2.1. Drying drum: model ES2390, drum diameter 2,300 mm, drum length 9,000 mm, 4 x 15 kW drive motors, soft start drive, aggregate temperature measurement output.
2.2. Burner: high-pressure Oertly MIB 453, combination burner, maximum output 11,954,000 kcal/h, burner fan power 30 kW, ready to operate on both natural gas and diesel fuel.
3. Mixing tower
3.1. Aggregate elevator, dimensions 1,100 x 670 mm, motor power 15 kW,
3.2. Ammann VA1840 screening machine, 5 fractions, 5 tiers, 1,800 x 4,000 mm screen size, 31 m² screening area, 2 x 7.5 kW drive motors.
3.3. Hot material hopper, fraction #5 + 1 bypass, hopper capacity
18 m³ (30 t), 5 constant level sensors, 60 mm insulation thickness, density 80 kg/m³, shrink-wrapped.
3.4. Ammann Amix 2/4 mixer, 3,500 kg capacity, 2 x 50 kW drive motors, with electric heating.
3.5. Dosing devices:
3.5.1. Crushed stone batcher, maximum capacity 3,500 kg, 3 sections.
3.5.2. Bitumen dispenser, 300 kg capacity, 1 section.
3.5.3. Filler dispenser, 400 kg capacity.

3.6. General:
4 x 50 t bitumen tanks

3.6.1. Bitumen feed pump, 50 m³/hour capacity, 15 kW motor, bitumen filter, 3-way valve, fully electrically heated, all lines insulated;
* Ladders and railings.
* All ladders are galvanized.
4. Filtration system
4.1. Filter, model DM-IF 450, sleeve type, aramid sleeves with a density of 450 g/m², 470 bags, filtration area 750 m², air flow 69,300 Em/h.
4.2. Fan with filter, 92 kW motor.
4.3. Discharge pipe, height 6.
4.4. Compressor, model PS 15 MT8, operating pressure 8 bar, capacity 2.43 m³/min, engine power 15 kW.
5. Aggregate system
5.1. Dust silo, capacity 25 m³, high and low level sensors, screw conveyor, discharge pipe for vehicles.

6. Finished asphalt hopper.
6.1. Finished asphalt hopper, 1 section, 2 pneumatic mats for unloading, with electric heating and thermal insulation, hopper capacity 17 m³ (30 tons).
6.2. Oversized material hopper, capacity 2 m³

7. Control system
7.1. Control cabin, dimensions 2,420 * 6,500 * 2,420 mm, air conditioning
7.2. Automatic control system type AC1.