Block line for the production of paving slabs SUMAB R-1500 (2500 m2), Sweden

A representative of the Swedish company "Scandinavian&UK Machines AB" (SUMAB) invites you to learn about equipment for the production of concrete and concrete products: mobile and stationary concrete plants, vibratory presses for paving slabs and curbs, equipment for the production of precast concrete wall panels and blocks, cement unloading and storage equipment, and cold mix asphalt plants.

SUMAB offers high-quality equipment at factory prices, without intermediaries.

The company provides a full range of services, including delivery, commissioning, and maintenance.

SUMAB R-1500 stationary automatic line for the production of paving slabs, blocks/pavers/curbs, and other concrete products (Sweden), with automatic and semi-automatic operation.

These block lines are equipped with a high-tech Knauer or Synchrotronic vibration system.

Maximum productivity (per shift (8 hours)):
- 23,000 hollow blocks (20x20x40 cm)
- 2,000-2,600 m² of paving stones (10x20x6 cm) per shift.
- 2,800-4,000 curb stones, depending on curb size and the presence of an additional facing layer.

Maximum usable press area: 1,300x1,050 mm.

Production line components:
The Sumab stationary high-capacity plant consists of the following components:
Sumab stationary block making machine with automatic or semi-automatic control.
Knauer vibration system, Germany.

Mold.

A separate mold is required for each product type (pavers, blocks, curbs, etc.). An additional material bin for applying paint and a hard surface to concrete products.

A device for transporting finished concrete blocks from the block machine with adjustable ramp start/stop speeds, consisting of two chain transport systems.

Elevator – An automatic device for lifting and accumulating pallets with finished products (with 10 or 12 levels for blocks or two 10 or 12 levels for paving stones).

Lower – An automatic device for lowering pallets with dry finished products from the racks onto a transport conveyor (with 10 or 12 levels for blocks or two 10 or 12 levels for paving stones).

A conveyor belt for moving pallets with dry products to a cubic position and then turning the pallet – a cross-transfer.
A pneumatic crane with a grab for transferring finished products from pallets to Euro pallets.

Empty pallet return device: cross-transfer of pallets with return to the storage warehouse.
Lamels – conveyor for transporting finished products to packaging and storage.

Automatic production line control system and PC, Siemens computer program. Cables, fuse system, emergency safety system.

Concrete plant with a capacity of up to 20-30 m³.
3x15 m³ aggregate storage areas, P1125/750 liter mixer,
skip, cement batcher, pneumatically opening valves, augers, and silos.

Automation and Siemens PC for base concrete production.

Electrical engineering. Mains voltage: 400 V / 50 Hz
Machine nominal power: 44 kW
Fuse: 160 A
Control voltage: 230 V / 50 Hz
Hydraulic valve control voltage: 24 V
Additional options:
Cement feed auger, 10 m long. Cement silo, 60-200 tonnes (including level indicators, filter, ladder, railings, etc.)
Concrete plant, 10-15 m³ for producing colored curbstone and/or paving stone surfaces.
2 x 7.5 m³ aggregate storage tanks, P560/375 liter mixer, skip, automation, and a Siemens PC.

The complete set can be customized according to customer requirements.