Welding machine for the production of 3D panels.

Welding machine for 3D fence panel production.

Technical specifications:

Wire diameter, mm: 3-6

Mesh length, mm: 3000

Mesh width, mm: 2500

Number of electrodes: 51

Longitudinal pitch, mm: 50 fixed

Cross pitch, mm: 50-400 software-controlled

Machine control: Siemens PLC

Transformer No. 13, double secondary

Transformer capacity, kVA: 75

Number of cycles: 40/min

IS8 straightening and cutting machine

1.1. Electric feed

Construction: welded steel
Wire direction: left to right
Wire spool sizes: max. Coil weight: 1000 kg
Drive: Electric
Power: 3 kW
Unit of measurement: 1500 x 2000 x 1500
Unit weight: 500 kg

1.2. IS8 Straightening and Cutting Machine

Design: Welded steel
Wire direction: Left to right
Drive type: Electric motor
Power: 10 kW
Unit weight: 1800 kg
Machine size: 900x1800x800

Technical specifications:

Wire diameter, mm: 3-8

Wire strength, max., N/mm: 2,750

Speed, m/min: 60-80

Straightening type: Rotor

Total power, kW: 10

Drive type for traction: Electric motor

Drive type for rotor: Electric motor

Drive type for cutting: Electric motor (SERVO)

Cutting accuracy per meter of corrected wire: +/- 1 mm

Permissible curved curvature, % per 1 m: 0.6%

Minimum/maximum length Cutting capacity, mm 500-12000

Rotor speed, rpm 3000

Cutting wire type - On-the-go (non-stop)

Total weight, kg 1800

Dimensions 900x1800x800

Total equipment power not less than 125 kW

PSR 3000 wire table

Construction: welded steel
Wire direction: Left to right. Maximum wire size: 3000 mm
Tie-down wire: Part for automatic sealing wire

• Number of stages: Two-stage

VM2500/50 welding machine

Construction: Welded steel structure
Drive: Electric servo motor
Power: 2.2 kW
Unit of measurement: 3200 x 2600 x 1150 mm
Unit weight: 1000 kg
Number of wire housings: 51

2.1. Welding section

Construction: welded steel
Cylinders: Electro Press
Number of electrodes: 51
Number of transformers: 13 double secondary
Transformer power: 75 kVA
Long step: fixed 50 mm
Cross wire insertion: manual dispenser
Machine size: 2900 x 2500 x 2000

Exit section

- Welded steel construction

- Drive type: Servo motor

- Max power: 4 kW

- Maximum dimensions (W x D): 2500 mm x 3000 mm

- Machine size: 3000 x 4200 x 1500 mm

Operating mode: 3 types

Operating mode:

All at once
Individual (sequential, "cascade")
In a group (several electrodes simultaneously)

Power, 3x380

Electrode Cooling: Water

Water Flow Rate, L/min: 30-45

Air Flow Rate, M³/min: 3.5-5

Air Pressure, Bar: 6-9

Linear Wire Addition: Manual, Semi-Automatic

Cross Wire Addition: Magnet Dispenser

Adjustment Tray for Finished Wire Mesh: Manual with Lever

Mesh Bending Unit: MB/2500

Construction: Welded Steel

Drive Type: Hydraulic

Power: 7.5 kW

Force: 800 KN

Maximum Width: 2500 mm

Maximum Dimensions: 3300 x 1000 x 2200

Additional Options:

1. Automatic Long Wire Feeder (Automatic Long Wire Dispenser)

2. Automatic Long Wire Bending Unit Bending and packaging of 3D panel products

3. Double cross bending (higher pressure, reliable electrodes, more powerful transformer for the cross wire): welding (8x6x8 mm), block for adding two cross wires).

12-month warranty.