Block line for the production of paving slabs SUMAB R-1000 (1500 m2), Sweden

The SUMAB R-1000 stationary automatic line for the production of paving slabs, blocks/pavers/curbs, and other concrete products (Sweden) offers automatic and semi-automatic operation.

These block lines are equipped with a high-tech Knauer or Synchrotronic vibration system.

Maximum productivity (per shift (8 hours)):
- 17,200 hollow blocks (20x20x40 cm)
- 1,360-1,680 m² of paving stones (10x20x6 cm) per shift.
- 2,400-2,800 curb stones, depending on curb size and the presence of an additional facing layer.

Maximum usable press area: 1,300x900 mm.

Production line components:
The Sumab stationary high-capacity plant consists of the following components:
Sumab stationary block making machine with automatic or semi-automatic control.
Knauer vibration system, Germany.

Mold.

A separate mold is required for each product type (pavers, blocks, curbs, etc.). An additional material bin for applying paint and a hard surface to concrete products.

A device for transporting finished concrete blocks from the block machine with adjustable ramp start/stop speeds, consisting of two chain transport systems.

Elevator – An automatic device for lifting and accumulating pallets with finished products (with 10 or 12 levels for blocks or two 10 or 12 levels for paving stones).

Lower – An automatic device for lowering pallets with dry finished products from the racks onto a transport conveyor (with 10 or 12 levels for blocks or two 10 or 12 levels for paving stones).

A conveyor belt for moving pallets with dry products to a cubic position and then rotating the pallet – a cross-transfer.
A pneumatic crane with a grab for transferring finished products from pallets to Euro pallets.

Empty pallet return device: cross-transfer of pallets with return to the storage warehouse.
Lamels – conveyor for transporting finished products to packaging and storage.

Automatic production line control system and PC, Siemens computer program. Cables, fuse system, emergency safety system.

Concrete plant with a capacity of up to 20-30 m³.
3x15 m³ aggregate storage areas, P1125/750 liter mixer,
skip, cement batcher, pneumatically opening valves, augers, and silos.

Automation and Siemens PC for base concrete production.

Electrical engineering. Mains voltage: 400 V / 50 Hz
Machine rated power: 44 kW
Fuse: 160 A
Control voltage: 230 V / 50 Hz
Hydraulic valve control voltage: 24 V

Additional options:
Cement auger, 10 m long.

Cement silo: 60 tonnes (including level indicators, filter, ladder, railings, etc.)

Concrete plant: 10-15 m³ for producing colored curbstone and/or paving stone surfaces.
2 x 7.5 m³ aggregate storage tanks, P560/375 liter mixer, skip, automation, and a Siemens PC.

The complete set can be customized according to customer requirements.